The use of HXD1001 code measuring instrument
1. introduction:
The remote detection instrument is suitable for the batch production line detection of remote control, quality inspection, maintenance, research institutions, manufacturers of home appliances, remote control manufacturers. For infrared remote control infrared remote control production plant, Biotinge factory, R & D institutions, production or development of automatic testing for judgment of the remote control is the upgrading of products, function code group update, pre entry, automatic alignment, a voice prompt digital display tester key right, HXD1001 type testing instrument with high reliability, high precision, high speed chip decoding analysis can identify multiple encoding formats, with digital display and voice prompt test personnel, reduce test sparse The utility model has the advantages of small error, small size, convenient carrying, independent use and simple operation, and is widely used in the test, analysis and mass production verification of infrared code remote control products.
2,[Instructions]:
In any mode of operation, the button has a short BEEP sound prompt. Each time the correct decoding has a short BEEP sound
Func1: common mode can decode the display format (remote control code, the decoder receives correctly display the customer code and key). The boot in Func1 mode, the decoding display format, such as "6121"; will keep off before each start decoding format; short press "KEY+" or the "KEY" button, you can choose different decoding format.
The Func2: entry mode, remote batch test before, first of all the key input on a remote machine, most input 70 keys. Each remote control code, decoding display code and key customers, when all the input keys need have been normal code, short press "KEY +" button, all the input will have decoding display button, display the number of input keys. The entry is complete, you can press the "SET" button to enter the order model of proofreading or disorder model of proofreading test, still keep the contents of entry after power off, the next boot can be directly ordered to proofread mode or disorder proofreading test pattern.
Func3: ordered proofreading and entry mode, must code the same key code sequence. When all the keys into the remote control code correctly, will display "PASS", and "1", the correct count increased BUZZER for BEEP, BEEP 2 ring; can continue to conduct tests under a remote control. If a remote controller to complete the test, short press "KEY +" button, the error count increased the number of "1", also shows that the remote error count, such as "E 2"; this can continue under a remote test model of proofreading.Func4: disorder, disorder of school It is designed for batch testing of remote testing, provides a fool test accurate and efficient method for testing workers, can test the keys in any order, not according to the order of test input, improve the test efficiency; when all input keys, remote control code, PASS will display "" at the same time, the correct count increase "1", BUZZER for BEEP, BEEP 2 ring; can continue to test a remote controller. If a remote controller to complete the test, short press "KEY +" button, the error count increased the number of "1", and display the error control count, for example" E 2 "; you can proceed with the next remote test at this time
Func5: statistical model is used to display the test results, short press "KEY" button to display the correct remote count, such as "P 98"; short press "KEY" button to display the remote error count, such as "E 3"; long press "KEY +" button for 3 seconds, "zero count right" and "error count."
(2) key definition:
The function selection key ("SET") is used to select the mode of operation
2 confirm / clear key ("KEY +"):
Func1 in normal mode, used for turning up the format selection;
In the Func2 input mode, used to enter all the keys, buzzer long rang;
In the Func3 order collation mode, used for a remote control, the test error to start the test;
In the Func4 mode, a remote controller is used to restart the test error when testing error;
In the Func5 statistics mode, press the "KEY +" button to browse the normal results of the statistical test, press the "KEY +" button for 3 seconds to clear the test results
3 "KEY Func1" - key: in the normal mode, select the format for turning down;
In the Func2 entry mode for clear entry;
In the Func4 statistics mode, browse the statistical test error results;
(3) indicator light:
Red light, receiving wave signal indicator lamp;
Yellow light, orderly proof mode indicator lamp;
Green light, input mode indicator;
The green and yellow lights indicate 5 states:
A. when the green light, yellow lights all out, said Func1 common mode;
B. when the green light, yellow light, said Func2 entry mode;
C. when the green light is off, the yellow light is bright, indicating that the Func3 orderly proofreading mode;
D. when the green light, yellow lights out (the same as the Func1 common mode), said Func4 disorderly proofreading mode;
E. when the green light, yellow light all bright, said Func5 statistical mode;
(4), the detection speed: each instrument can detect 2000-3000 remote control, according to the calculation of 10 hours;
3. Support remote table format:
4, electrical parameters and dimensions:
(1) electrical parameters: operating voltage: 85-250VAC
(2) dimensions: length X width X height: 150X99x52 (mm)
5, the use of note:
(1) when the instrument is not used for a long time, the power supply should be turned off to avoid the instability of the power supply
(2) avoid the use of strong light, light instability in the environment, so as not to cause interference in the light of the test process
(3) when the two test station very close, will cause the interference signal is the first station sent by the remote control equipment was another station received interference testing process, a solution is to use a shield isolation of two stations, because the infrared receiving head is a straight line; or window in the instrument mount on the light transmittance of a material with a low attenuation, infrared signal, shorten the receiving distance, so that it does not receive the signal from the remote station adjacent issued.
(4) how to test the remote distance? Direct remote distance test and launch the instrument can not, but can be through indirect means, such as workers were tested in the distance of 8 meters outside the instrument, if the test showed that the remote transmitting distance greater than 8 meters, or by a method such as signal attenuation, signal attenuation after 0.5 meters test the equivalent of 8 meters test.
